Sika AnchorFix®-1

Sika AnchorFix®-1

Sika
€17,52
€17,52
Sold out
VAT EXCLUDED
Fast curing anchoring adhesive

Solvent and styrene free based, two-component polyester anchoring adhesive.

  • Fast curing
  • Standard guns can be used
  • Can be used at low temperatures

Usage

As a fast curing anchoring adhesive for all grades of:
  • Rebars / reinforcing steel
  • Threaded rods
  • Bolts and special fastening systems
  • Concrete
  • Hollow and solid masonry
  • Hard natural stone*
  • Solid rock*
*  These substrates may vary greatly, in particular with regard to strength, composition and porosity. Therefore, for each application the suitability of Sika AnchorFix®-1 Adhesive must be tested by first applying Sika AnchorFix®-1 Adhesive only to a sample area. Check in particular bond strength, surface staining and discolouration.  

Advantages

  • Fast curing
  • Standard guns can be used
  • Can be used at low temperatures
  • High load capacity
  • ETA Approval available
  • Non-sag, even overhead
  • Styrene-free
  • Low odour
  • Low wastage

Packaging

150ml and 300ml cartridges

Colour

Component A: white
Component B: black
Component A+B mixed: light grey

 

Shelf Life

12 months from date of production

All Sika AnchorFix®-1 cartridges have the expiry date printed on the label.

Storage Conditions

Stored properly in original, unopened, sealed and undamaged packaging in dry conditions at temperatures between +5 °C and +25 °C. Protect from direct sunlight.